[V5.5.6]
1. Fixed an issue where mouse emulation was mapped to the wrong display.

[V5.5.5]
1. Fixed an issue where the green underline would not appear after clicking on some touch devices. 

[V5.5.4]
1. Application improvement to fix high CPU usage 
2. Disable the 3-day running limitation of the task scheduler

[V5.5.3]
1. Fix sound bug when clicking dropbox ui then other ui below
2. Clear message after mouse mapping succeed or cancel
3. Refine FW Update UI

[V5.5.2]
1. Fixed an issue where the number of supported devices might not be displayed correctly during startup.
2. Fixed an issue where the number of supported devices might not be displayed correctly when a new supported device is attached.
3. Fixed an issue where toggling sound from the system tray would not save the setting.
4. Fixed an issue where the number of supported devices might not be displayed correctly after restoring the default settings.

[V5.5.1]
1. Fix mouse mode not working when UAC prompt

[V5.5.0]
1. Add HP GUI.
2. Fix sound bug when change windows time zone.

[V5.4.8]
1. Implement payload length check for 86 command.

[V5.4.7]
1. Fix startup issue on Windows 11.

[V5.4.6]
1. Remove virtual key function by requirement change.

[V5.4.3]
1. Fix crash bug when touch windows title on IMU device.
2. Remove Qt::AA_SynthesizeMouseForUnhandledTouchEvents

[V5.4.2]
1. Fix bug for missing 5 finders touch mapping on normal style GUI.

[V5.4.1]
1. Add new role to start c0 mouse
=> C0Mouse=0, FwMouse=0 => Using Fw mouse and unvisible FwMouse gui setting.
=> C0Mouse=0, FwMouse=1 => Using Fw mouse and visible FwMouse gui setting.
=> C0Mouse=1, FwMouse=0 => Using C0 mouse after mapping and unvisible FwMouse gui setting.
=> C0Mouse=1, FwMouse=1 => Using C0 mouse after mapping and visible FwMouse gui setting but it will use Fw Mouse with 1 sis device.
2. Add Virtual Key function.
=> New ini item for enable/disable virtual key function. [VirtualKey=0/1]
=> If C0 command return length < 35, it will also disable virtual key function.
=> Using a button to ON/OFF virtual key status.

[V5.3.16]
1. Implement 5 fingers touch mapping on normal style GUI.
2. Improve bat file in installer.

[V5.3.15]
1. Implement cbTouchSlider to handle slider bar.

[V5.3.14]
1. Update installer.
2. Using bat file to create task schedule with short path.

[V5.3.13]
1. User requirement: Device tip on normal style GUI.

[V5.3.11]
1. The font size change to 16 on TrayIcon menu.
2. Rename Mtgest to Drawing Test.
3. Fix flow bug when add sccond device.

[V5.3.10]
1. Add Guide button.
2. Hide Guide button when the doc not found in install folder.
3. SiS_Touch_Utility_User_Guide_VN.pdf is normal style gui.
4. SiS_Touch_Utility_User_Guide_VI.pdf is image style gui.

[V5.3.9]
1. Modify fw version.

[V5.3.8]
1. Add Main/Sub Touch information by user's requirement.
2. Improve combobox click in c0 mouse mode.

[V5.3.5]
1. Implement small size GUI by user's requirement.
2. Add mtgest  by user's requirement.
3. Relocate button by user's requirement.

[V5.2.14]
1. Add c0DelayTime in ini file, default is 3000 (ms)

[V5.2.13]
1. Fix buzzer frequency issue.
2. Fix combobox crash.

[V5.2.10]
1. Fix click on touch not work on image style gui.
2. Fix slider bar issue on image style gui.
3. Fix no sound when open file dialog.
4. Improve function from hanasis.

[V5.1.3]
1. Add disable feature function by fw cmd length.

[V5.1.2]
1. Implement new feature in image style gui.

[V5.1.1]
1. Add DefaultRejectRange, DefaultRejectThreshold in ini.

[V5.0.12]
1. Fix issue for missing fw information. 

[V5.0.11]
1. Modify default value: rejection=15, threshold=30, max_tp=10

[V5.0.10]
1. Modify default value: rejection=30, threshold=15, max_tp=10

[V5.0.9]
1. Fix bug: fail to start mouse when add/remove device on normal style window.

[V5.0.6]
1. Improve multi-thread performance for C0 mouse.

[V5.0.5]
1. Improve log.

[V5.0.3]
1. New GUI for Hanssis(Acdc style)
2. Support new C0 format Fw command.

[V4.11.2]
1. Fix very quickly click mouse mapping will cause mapping issue.

[V4.11.1]
1. Fix mouse mapping issue on Win11. (Win10 OK)
2. Update default ini file.

[V4.10.3]
1. Fix add/removce screen "WinDisc" issue.

[V4.10.2]
1. Fix auto rotation issue.
2. Add new buzzer frequency.

[V4.10.1]
1. Add Auto for rotation.

[V4.9.13]
1. Setting with new Fw to fix mouse position.

[V4.9.12]
1. Using primary screen to check sis screen.
2. Using Emulation/Primary in combobox.

[V4.9.9]
1. Rescan function for screen info.

[V4.9.8]
1. After addd screen, if screen item same as SiSScreen, auto select it.
2. After Add/Remove screen, delay 1000ms to send command.

[V4.9.7]
1. After Add/Remove screen, delay 2000ms to send command. (Old is 500ms)

[V4.9.6]
1. Fw mouse Rotation with new Fw.

[V4.9.5]
1. Add Manual item in SiSScreen setting.

[V4.9.3]
1. SiSScreen ini setting.

[V4.9.1]
1. Support buzzer on Win11. (Using WinRing0 to control buzzer)
3. Rotation config support same PID.

[V4.8.12]
1. Support screen resolution change to set C0 dual mode command.
(Only Extend Left/ Extend Right/ Extend Up/ Extend Down)

[V4.8.11]
1. New Dual Monito item.
[Extend Left=1,Extend Right=2,Extend Up=3, Extend Down=4, SiS Master=0, SiS Slave LR=5, SiS Slave UD=8]
2. New ini DualMonitor=[0/1], 0=disable dual monitor, 1=enable dual monitor
3. New ini ExitMode=[0/1/2], when exit utility it will use the setting. 0=Mouse, 1=SingleTouch, 2=MultiTouch

[V4.8.10_gama]
1. Fix coordinate issue when one screen size large and athoer small.
2. Add None item in dual mode.
3. Fix coordinate issue on screen edge.
4. Implement scrren change event monitor.
5. Delay 500ms to send command when screen change.

[V4.8.3_beta]
1. Test ok [1024X768,1024X768], [800X600,800X600], [1024X768,800X600], [800X600,1024X768] and left/right/up/down.

[V4.8.2_beta]
1. Test dual mode with new Fw.

[V4.8.0_beta]
1. Support C0 command(Length 22) for new FW.

[V4.7.2_beta]
1. Add Fw dual mode setting.
2. Resize GUI to 650X450.
3. When exit program, set mode with ini setting.

[V4.6.7]
1. Remove get command.
2. Using beepHz/beepTime in ini for CheckC0Func.

[V4.6.6]
1. Add MouseMapping in ini.
2. Using dual in ini to control extend monitor.

[V4.6.5]
1. Add BuzzerOnCOB in ini. (Remove at [V4.6.1])
2. Fix value issue between buzzer and beep GUI change.

[V4.6.4]
1. Add -ba for update fw.

[V4.6.3]
1. Add lost COB setting command for other sound setting.
2. When using COB buzzer, it will only show finger down.

[V4.6.2]
1. Add BuzzerMaxOnCOB/BuzzerMinOnCOB in ini file.

[V4.6.1]
1. Remove BuzzerOnCOB in ini file.
2. Using C0 command size to check buzzer on cob.

[V4.6.0]
1. Add buzzer on COB function.

[V4.5.4]
1. Resize GUI from 850X670 to 750X600.

[V4.5.3]
1. Show mapping when 1 device.

[V4.5.2]
1. Fix double-click bug when restart utility with MODE_MOUSE.
2. Fix mode change bug when restart utility with MODE_TOUCH.

[V4.5.1]
1. Fix issue for three screens.

[V4.4.8]
1. Change to touch when windows os sleep.
2. Change to touch when close utility.
3. Trun off buzzer when close utility.

[V4.4.6]
1. Fix emulator mouse mode right button issue.

[V4.4.5]
1. Fix buzzer frequency issue.

[V4.4.3]
1. Fix click issue in mouse emulator mode when open fw update.

[V4.4.2]
1. Fix some issue when device change.

[V4.4.1]
1. Add mouse/touch rotate degree function.

[V4.3.10]
1. Auto rotation with software emulate mouse. (C0/D0 mode)

[V4.3.5]
1. Fix random bug.
2. Hide updateFW GUI when click X button.

[V4.3.3]
1. Refine back button in update function.
2. Fix device count bug in update function.

[V4.3.2]
1. Add Fw and bin file PID check.
2. Add -disable-back for nUpdateFW.exe.


[V4.3.1]
1. Add reset config.
2. Add updateFW function.

[V4.2.11]
1. Add report id 0x91

[V4.2.10]
1. Add buzzer function.

[V4.2.9]
1. Only process mouse event in mouse mode.

[V4.2.8]
1. Play sound in background.

[V4.2.7]
1. Play beep after SendInput to OS.

[V4.2.6]
1. Fix D0 mode command polling time issue.

[V4.2.5]
1. Fix D0 mouse mode bug.
2. Add default ini.

[V4.2.3]
1. Add mouse config.
2. Add D0 mouse mode.

[V4.1.7]
1. Update language file.

[V4.1.6]
1. Add miss language.

[V4.1.5]
1. Add on/off device function.

[V4.0.9]
1. When the program start by task scheduled it will show tray only.

[V4.0.8]
1. Add installer named SiSTouchUtility.
2. Add silent install function.
3. The ini and log files will save on C:\Users\Public\Documents
4. If the user put the SiSTouchUtility.ini with installer file, it will replace to C:\Users\Public\Documents.

[V4.0.6]
1. First release.